Jeśli jesteś właścicielem tej strony, możesz wyłączyć reklamę poniżej zmieniając pakiet na PRO lub VIP w panelu naszego hostingu już od 4zł!

iAMP100M

  • Schematic

    Schematic

  • Capacitance multiplier

    Capacitance multiplier

  • Main board

    Main board

  • LED diagnostics, SSR relay

    LED diagnostics, SSR relay

iAMP100M - second generation of 100W stereo OPS with SanKen output devices. More complex design and a lot of SMD components but it was woth it.

 

Main board consists:

- BJT tripple emiter follower output stage / MOSFET source follower output stage (depend on the schematic)

- Thermal protection

- DC protection

- Fast speakres OFF feature

- Delayed speakers ON feature - reduces speakers ''thumb'' at amplifier turning ON phase

- Short circuit and overload protection

- Capacitance multiplier / PSU rail stabilisation (depend on schematic)

- LED diagnostics

 

Recommended transformer --> 2x 35Vac 300VA

Output power --> 2x 100W @ 8R load

THD @ 1kHz, 8R load, full power --> 0,002% (IPS depended)

 

Amplifier board has capacitance multiplier build in. The miltiplier can be easly converted into the stabilised supply but two mosfets on the left side of the board should be placed under the PCB and bolted on to the amplifier chassis ''floor" (it will improve heat dissipation). It is recommended to setup approx  2V of the drain to source voltage drop across the mosfets on the left side of PCB.

Speakers protection is using SSR mosfet relays so the mechanical components are eliminated (improved reliability, no arcing at switching), lower ON resistance than classic relays (not affecting so much the damping factor of the amplifier), extremly fast switching. SSR relays are fitted at the GND return, so the amplifier output goes dirrectly to the speakers.

The short circuit protection is using opto triac as a current sensing element so it doesn't affect the sound coming from the output terminals at all !! (as the VI limiter does).

Capacitance multiplier --> This is an active way to increase capacitance and decrease output impedance of the PSU. Both voltage rails have separate capacitance multipliers. The way it works is very simple. Differential amplifier forms very simple comparator which is sensing the PSU input voltage threw RC network, output voltage is regulated with mosfets at the left side of the board.

Script logo